Gulfstream G280

The Gulfstream G280 is a twin-engine business jet built under license by IAI in Israel for Gulfstream Aerospace. It began delivery to users in 2012.

he aerodynamic design of its wing and empennage, and design of the interior were performed by Gulfstream; detailed design was performed by IAI to Gulfstream’s requirements.[11] It is a Gulfstream designed aircraft under a new type certificate.[12]

The aircraft has several improvements, among them increased cabin length (external fuselage dimensions remain unchanged; the rear fuselage fuel tank was eliminated to add 17 inches (43 cm) of usable interior area). It has a new HTF7250G engine, new T-tail (with larger horizontal and vertical stabilizers), wing anti-ice provided by engine bleed air, cabin with four more windows and access from the cabin to the baggage compartment. It competes against the Bombardier Challenger 300 and the Cessna Citation X+. The fuselage, empennage and landing gear are manufactured by IAI, the wing by Spirit AeroSystems (now by Triumph Group), and the aircraft is assembled in Israel. It is then ferried to Dallas, Texas, for interior finishing and painting.

Seats Full Range (NM / SM): 3302 / 3800
Ferry Range (No Payload) (NM / SM): 3,598 / 4,140
Balance Field Length* (Take-off Distance in Feet): 4,631
Landing Distance (Feet): 3,882
Average Block Speed (KTS / MPH): 458 / 527
Normal Cruise (KTS / MPH): 458 / 527
Long Range Cruise Speed (KTS / MPH): 448 / 515
Fuel Usage (Gallons Per Hour): 274.00
Service Ceiling (Feet): 45,000
Useful Payload With Full Fuel (Lbs): 975
Maximum Take Off Weight: 39,600
Maximum Landing Weight: 32,700
Basic Operating Weight: 23,546
Total Usable Fuel Weight: 14,235

RANGE MAP

range map gulfstream g280

Minimum Crew / Maximum Passengers: 2 / 8
Baggage Capacity External / Internal (Cubic Feet): 120 / 34
Cabin Height (Feet): 6’3″
Cabin Width (Feet): 7’2″
Cabin Length (Feet): 25’10”
Cabin Volume (Cubic Feet): 1157.12
Years in Production: 2012-2019
Active Fleet (approximate): 90.00

cabin specs Gulfstream G280

Airframe Maintenance Per Hour: $425.00
Engine / APU Maintenance Per Hour: $630.00
Fuel Cost based on Gallons Per Hour: $1,164.50
Crew Misc.: $467.00
Total Variable Cost Per Hour: $2,686.50
Cost Per NM: $5.86